Plastics Technology - Dedicated to improving Plastics Processing.
Not Your Father's Downstream Extrusion RUN LINE SPEED FPM 100 ACTUAL SET 75.0
WATER TEMP F
75.0
BACK TO SETUP
MASTER LINE TANK 1 TANK # PULLER CUTTER LOGIN 72.0
WATER GPM
72.0 RECIPE # 1102
UPDATE RECIPE
O/C O/C O/C
14.2 VAC
PUMP PSI 14.2
0.00 TANK
POSx IN 0.00
.13 TANK
POSy IN .13
.55 TANK
POSz IN .55
75
RETURN WATER F
75 75
PART IN TEMP F
75 LINE SPEED FPM 100.0
TARGET SPEED 100.0
COMPRESSION FORCE LB
COMPRESSION FORCE SETTING
BELT GAP
123 123 2.00 IN
LINE SPEED
CONSTANT FORCE MODE
MASTER LINE
STOP/BACK TO SETUP
TANK 1 TANK # PULLER CUTTER LOGIN
All that changes with our Bessemer Downstream Series…
➜ Standard recipe menus to help you make your process more repeatable
CUT LENGTH IN. 24.00
BOX 2
PIECE 325
OF 25
OF 7500 RECIPE #
RUN 1102
UPDATE RECIPE
PART TEMP F 160.0
ENCODER MODE
ON-DEMAND
CONVEYOR SPEED FPM 110
➜ Monitor downstream from any other component on the line
BACK TO SETUP
START & COUNT
MASTER LINE TANK 1 STOP
BACK TO SCRAP
TANK # PULLER CUTTER LOGIN
➜ Standard Siemens PLC touchscreen controls ➜ Standard wireless connectivity ➜ Standard networking for trending to your PC ➜ Standard Servo-Drive technology
➜ Standard integration with Maguire Gravimetric Loss in Weight Systems
Email alarms and out of trend information
New Novatec extrusion cooling simulation software takes the guess work out of the required tank length to ensure repeatable quality with the lowest energy usage.
RECIPE #
RUN MANUAL 1101
UPDATE RECIPE
Poor speed regulation, non-servo drives, proprietary non-communicative microprocessor controls and more have resulted in an industry that relies on the operator experience and intervention for proper setup and performance.
Chances are if your father worked in downstream tube or profile extrusion, he had the same basic downstream equipment you have now.
Pullers, cutters, saws and cooling tanks are one of the few areas that technology seems to have left alone in a world that keeps doubling innovation yearly.
4OLL &REE;
s &AX; WWW NOVATEC COM s SALES NOVATEC COM © Copyright 2012 Novatec, Inc.