Plastics Technology - Dedicated to improving Plastics Processing.
Issue link: http://pty.epubxp.com/i/707262
8303 CORPORATE PARK DRIVE, MACEDONIA (Cleveland), OHIO 44056, USA 216-367-7000 • Toll Free: 800-321-0562 • Fax: 216-367-7022 • Order Fax: 800-223-8305 6385 Montessouri Street, Las Vegas, Nevada 89113 702-433-6385 • 800-258-8877 • Fax: 702-433-6388 11218 Challenger Avenue, Odessa, Florida 33556 727-834-8888 • 800-282-6783 • Fax: 727-834-8873 Toll Free: USA, Canada & Mexico 800-362-0706 P LASTIC P ROCESS E QUIPMENT , INC . PPE www.ppe.com • e-mail: sales@ppe.com PPE W E S T PPE S O U T H REGENERATIVE BLOWERS ( VACUUM PUMPS ) FOR DRYERS, PNEUMATIC CONVEYORS, VACUUM SYSTEMS, ETC. Manufactured since 1986, the All-Star Regenerative Blowers are the best choice for applications requiring a quiet, 100% oil-free, odor-free and non-pulsating air or gas supply. Regenerative Blowers are also referred to as side channel, vortex or ring-type blowers. All-Star Regenerative Blowers (Vacuum Pumps) offer an alternative to traditional high pressure blowers and pumps. The regenerative blower is suitable for applications where positive displacement (PD-type) blowers and pumps have been used. It's simple design permits the units to be used as a blower or vacuum pump - without added parts. FEATURES • 1/4 to 30 HP • Air Flow to 950 SCFM • Pressure to 11.5 psi • Vacuum to 12"Hg • Oil & Odor-free • Single or 3-Phase • Quiet: 53 to 81 db(A) Single Stage Models Single Stage Models as low as $560.00 Two Stage Models Stage Models as as low as low as $1,450.00 43 Models Available ISO-9001 MANUFACTURED IN A QUALITY SYSTEM CERTIFIED FACILITY. RoHS Compliant C Oil & Odor FREE High Pressure & High Flow Models For 15 years All-Star blowers, compressors and vacuum pumps have become a standard for OEMs and Users in the plastics industry. STRADDLE MOUNTED IMPELLER DESIGN High bearing temperatures that prove fatal in competitive blowers are eliminated in the All-Star design because the bearings are mounted on the outside of the blower housing. Damaging overhung loads are eliminated in the All-Star design because a bearing is located on each side of the impeller. This design permits mounting the blower in any orientation, including vertical shaft up or down. Competitive Overhung Bearing Design Inboard bearing subject to • High Heat • High Overhung Load Due To Radial Forces All Star Straddle Mounted Bearing Design Impeller Impeller Impeller Housing Outboard bearing • Cooler Operating Bearing • Overhung Load Eliminated nated • Overhung Load Eliminated High-efficient dynamically balanced impeller High temperature High temperature bearing bearing High temperature bearing lubricant melt point 385°F. Industrial duty, high efficient, 1.15 service factor AC motor with TEFC (IP54) enclosure. Class Class H insulation rated to 355º F. H Class H insulation rated to 355º F. insulation Class H insulation rated to 355º F. rated to 355º F. Corrosion resistant aluminum materials used for blower and motor housings, conduit box Viton seals suitable to 500°F to 500°F protects t to 500°F protects t to 500°F protects the the motor windings Removable flanges emovable Removable flanges flanges allow blower change change without without disassembly of pilings. Built-in silencers reduce noise well-below OSHA Standard Shock absorbing absorbing Shock absorbing mounting mounting base base