Plastics Technology

AUG 2016

Plastics Technology - Dedicated to improving Plastics Processing.

Issue link: http://pty.epubxp.com/i/707262

Contents of this Issue

Navigation

Page 65 of 75

PVC PRICES MOVING UP PVC prices stayed put for the second con- secutive month in June, after moving up a total of 6¢/lb in March and April. However, suppliers were pushing to get their June 3¢/ lb increase last month, and RTi's Kallman saw the possibility of 1-2¢ of that hike going through by month's end. Upward drivers included increases in base feedstocks chlorine and ethane, an expected uptick in overseas demand, and force majeure declared by Westlake Chemical at its Kentucky plant. Though not forthcoming about the cause of the disruption, the company said the plant would take longer to repair than originally expected. So, while PVC suppliers kept the market well supplied through May of this year, these negative factors were expected to limit the poten- tial for oversupply. PET PRICES HIGHER Bottle-grade prime PET resin in June averaged 56.5¢/lb, up 1.36¢ from May, based on PCW's PET Daily prices. On July 1, the price was 56¢/lb. Imported PET averaged 51¢/ lb in May, down 1.1¢, according to Xavier Cronin, senior editor of PET Daily and Weekly Recycled Plastics reports. He ventured that domestic PET prices would likely be steady in July, buyed by seasonal demand from U.S. bottlers and packaging manufacturers. June PET feedstocks settled modestly higher. U.S. prime PET supply remains plentiful due to a robust influx of packaging-grade PET from about 20 countries each month. Brazil, for one, has emerged as a major exporter of PET to the U.S. in 2016. In the U.S., M&G; Chemicals' 2.4-billion-lb/yr PET complex under construction in Corpus Christi, Texas, is due on stream in the first quarter of 2017 and will be the world's largest PET plant. Greenberg notes that June PP contracts that still include a monomer component would be impacted by the slight propylene contract increase, while other buyers were likely to see a lesser decrease for copolymer products—particularly specialty grades. Newell said there's potential for PP prices to drop a bit more. Greenberg states, "The PP market has fallen sharply during the second quarter—contracts lopped off a full dime and spot prices eroded even more. While the market could poten- tially slip some, we think there is limited downside at this point and foresee higher prices ahead once the market bottoms out and begins to recover." PCW reports that the arbitrage window for imported PP resin has been closed, but imported inventory remains in the market. Industry estimates are that the combination of resin imports and domestic debottlenecking has added about 1 billion lb to the market so far this year. This occurred "while domestic inven- tories grew by 200 million lb (excluding imports), a three-year high," says RTi's Newell. These sources noted rumors that some suppliers may intentionally throttle back production from the current high operating rates to rebalance supply. PS PRICES FLAT-TO-UP Polystyrene prices were flat again in June, but there were driving factors by early July for potential upward movement, according to Mark Kallman, RTi's v.p. of client services for engineering resins, PS, and PVC. One factor was the July benzene contract settlement, averaging 14¢/gal higher than June's $2/gal. Also, Total Petrochemical declared force majeure at the end of June for its Carville, La., styrene and PS plant due to an elec- trical failure. The monomer unit is back up, but the PS unit will take sev- eral weeks to restore to operation. PCW reported at June's end that PS spot prices were steady. Prime PS demand was described as decent; though reports indicated a slowdown in the second half of June. There was a steady flow of imported HIPS and offgrade HIPS available from domestic suppliers in June. RTi's Kallman notes that June butadiene contract prices were flat, alleviating further pressure on HIPS prices. PVC Price Trends Pipe JUNE JULY Gen. Purpose JUNE JULY Polystyrene Price Trends GPPS JUNE JULY HIPS JUNE JULY Polypropylene Price Trends Homopolymer JUNE JULY Copolymer JUNE JULY 4¢/lb 4¢/lb PET Price Trends Bottle Grade JUNE JULY 1.36¢/lb QUESTIONS ABOUT RECYCLED RESIN PRICING? Read the latest on recycled PET prices at short.ptonline.com/rPET 64 AUGUST 2016 Plastics Technology PTonline.com YO U R B U S I N E S S Resin Pricing Analy sis

Articles in this issue

Links on this page

Archives of this issue

view archives of Plastics Technology - AUG 2016