Plastics Technology

SEP 2018

Plastics Technology - Dedicated to improving Plastics Processing.

Issue link: https://pty.epubxp.com/i/1016765

Contents of this Issue

Navigation

Page 90 of 91

OLD BULL ® MOLD GREASE with PTFE OLD BULL ® MOLD GREASE with PTFE P LASTIC P ROCESS E QUIPMENT , INC . PPE www.ppe.com • e-mail: sales@ppe.com 8303 CORPORATE PARK DRIVE, MACEDONIA (Cleveland), OHIO 44056, USA 216-367-7000 • Toll Free: 800-321-0562 • Fax: 216-367-7022 • Order Fax: 800-223-8305 6385 Montessouri Street, Las Vegas, Nevada 89113 702-433-6385 • 800-258-8877 • Fax: 702-433-6388 PPE W E S T PPE S O U T H 11218 Challenger Avenue, Odessa, Florida 33556 727-834-8888 • 800-282-6783 • Fax: 727-834-8873 800-362-0706 P LASTIC P ROCESS E QUIPMENT , INC . PPE Toll Free: USA, Canada & Mexico PPE PPE OLD BULL ® MOLD GREASE with PTFE OLD BULL ® ADVANCED PTFE MOLD GREASE OLD BULL ® FOOD GRADE PTFE MOLD GREASE WHITE LITHIUM GREASE Quality Products, Fair Prices & Best Service since 1974 Quality Products, Fair Prices & Best Service since 1974 IDEAL FOR GEARS, CAMS, CABLES, PINS, SLIDES, BEARINGS, CHAINS, LATHES, ETC. IDEAL FOR GEARS, CAMS, CABLES, PINS, SLIDES, BEARINGS, CHAINS, LATHES, ETC. • Softer, thinner formula • Superior Load Bearing Ability • Temp. Range: -40 to 500°F • Color: Beige • Non-Melting • Non-Silicone • Anti-Corrosive • Waterproof • Forms an Adherent, but Slippery Film • Homogenized @ 6,000 psi OLD BULL ® is a registered trademark of Plastic Process Equipment, Inc. NO ABRASIVE CLAY FILLERS! OLD BULL ® IS ONLY AVAILABLE FROM PPE! OLD BULL ® is a registered trademark of Plastic Process Equipment, Inc. 16 oz. JAR AS LOW AS $12.85 16 oz. JAR AS LOW AS $13.20 • Thicker, less tacky formula • Superior Load Bearing Ability • Temp. Range: -40 to 500°F • Color: Translucent to off white • Non-Melting • Non-Silicone • Anti-Corrosive • Waterproof • Forms an Adherent, but Slippery Film • Homogenized @ 6,000 psi PPE OLD BULL ® DOES NOT CONTAIN ABRASIVE CLAY FILLERS! A true H-1 Rated Food Grade Mold Grease • Food Grade • NSF/USDA H-1 Rating • Kosher Approved • Non-Staining • Non-Melting • Non-Silicone • Temp. Range: -75 to 500°F • Color: Clear to Translucent • Forms an Adherent, but Slippery Film 15 oz. JAR AS LOW AS $13.75 ISO-9002 MANUFACTURED IN A QUALITY SYSTEM CERTIFIED FACILITY. 16 oz. JAR AS LOW AS $5.50 • USDA H-2 Rating • Temp. Range: -10 to 350°F • Flash Point: 375°F • Color: Off White • Rust resistant • Good water washout resistant characteristics • Also available in aerosol WL-125 OLD BULL ® is a registered trademark of Plastic Process Equipment, Inc.

Articles in this issue

Links on this page

Archives of this issue

view archives of Plastics Technology - SEP 2018