Plastics Technology

OCT 2018

Plastics Technology - Dedicated to improving Plastics Processing.

Issue link: https://pty.epubxp.com/i/1029098

Contents of this Issue

Navigation

Page 62 of 75

10 Pike Street West Warwick, RI 02893 Email: sales@guill.com Bill Conley We welcome your call or visit www.guill.com From the simplest single layer dies to the most complex multi layer heads, you can be sure that the Guill design will meet or exceed your requirements. Put our experienced engineering staff to work for you and take the stress out of your next project. Don't settle for less, look to the leader in extrusion tooling since 1962… Guill . Triple Layer C.V. Crosshead ALL THE RIGHT RESINS. FOR ALL THE RIGHT REASONS. A capacity for leadership in what matters most to you. dakamericas.com | 1.888.738.2002 When it comes to PET Resin, DAK Americas ® has just what you are looking for...Innovative PET Resins from pioneering research and development, state-of-the-art technologies and market know-how. All from one of the largest producers of PET Resins world-wide. DAK Americas' broad line of Laser ® PET Resins give you exceptional flexibility in meeting your design and production goals. From trade leading products and technical service to recycling, to sustainable raw materials, we continue to demonstrate not just our record of innovation, but our steadfast commitment to you and to the industry today, tomorrow, and well into the future... DAK Americas. + Quick-ROI Extruder for Engineering Resins Coperion Corp., Sewell, N.J., is now offering a cost-efficient, high- performance twin-screw extruder that is optimized for compounding engineering plastics. The ZSK 58 Mc 18 has a screw diameter of 58 mm and three possible screw configu- rations, covering a wide range of applications. Its high torque enables high throughput rates—for example, up to 3306 lb/hr in compounding nylon 6 with 30% glass fiber; or up to 3086 lb/hr for PP with 40% talc or calcium carbonate. 201-327-6300 • coperion.com A specialty nylon that is said to combine the chemical resistance of semi-crystalline nylons with the high gloss and depth-of-view of amorphous plastics has been developed by BASF, Florham Park, N.J. It is aimed primarily at automotive interior components that require high gloss and scratch resistance without the need for coating. Ultramid Deep Gloss is said to enable structured, functionalized surfaces for new operational concepts in cars. The new nylon is also characterized by high chemical and good UV resistance and is said to repro- duce structures true to detail, allowing for a high-contrast interplay of light and shadow. Outstanding abrasion resistance compared with other uncoated, high-gloss materials is also claimed. Now available globally in sample quantities, Ultramid Deep Gloss can be injection molded without variothermal mold technology. The material is expected to meet the growing trend for a "piano-black look" in car interiors and reportedly provides designers with new opportunities to imple- ment unusual textures such as ripples, waves, hammer finish, lines, and diamonds. Also, surfaces can be structured with haptic design elements. In combination with suitable sensor technology, this allows for integrated, functionalized designs. Applications include decorative trim (e.g., display edgings); decorative panels around lights; storage racks in headliners; and functional components (air-vent inlays in car doors or center consoles). 972-426-5426 • basf.com COMPOUNDING MATERIALS High-Gloss Specialty Nylon for Auto Interiors @plastechmag 61 Plastics Technology N E W P R O D U C T S F O R P L A S T I C S P R O C E S S I N G

Articles in this issue

Links on this page

Archives of this issue

view archives of Plastics Technology - OCT 2018