Plastics Technology

NOV 2018

Plastics Technology - Dedicated to improving Plastics Processing.

Issue link: https://pty.epubxp.com/i/1041125

Contents of this Issue

Navigation

Page 55 of 67

A new mold-temperature-control unit (TCU) designed by a molder for molders, is said to overcome many of the limitations of existing TCUs. Called Nextherm, the system comes from Aquatech, a Piovan Co., and is sold here by Universal Dynamics (Una- Dyn), a sister company. Both are located at the new headquarters of Piovan North America in Fredericksburg, Va. Nextherm is the invention of Kenneth Johnson, who has more than 49 years of expe- rience in the field, most of that as a mold-design engineer and program engineer in the Plastics Molding Systems Engineering Dept. of The Gillette Co. (now part of Procter & Gamble). When he retired from Gillette, Johnson set out to build a better TCU that would ameliorate mold-cooling problems he had faced throughout his career. The answer was a system called iCool (Intelligent Process Cooling System), described in detail in a May '15 Plastics Technology Close-Up article. That system has now been licensed exclusively and on a global basis to Piovan, which has renamed it Nextherm. Unlike most TCUs, which control only water temperature, Nextherm controls both temperature and flow rate by means of a positive-displacement gear pump with a variable-frequency drive (VFD). The system also uses proprietary software that computes the heat-transfer balance during the molding cycle in order to balance cooling against heat input from the melt, so as to provide a stable mold temperature throughout the cycle. Nextherm does not require sensors inside the mold. Instead, it uses pressure sensors in coolant flowing to and from the mold and magnetic flow sensors to measure flow coming from the mold. The positive-displacement gear pump provides a reliable measure of flow into the mold. The 15.5-in. touchscreen display shows supply and return water temperatures and pres- sures, differential temperature and pressure (ΔT and ΔP), and flow rate. The user can set a maximum pressure differential (up to 150 psi) to protect seals and water lines, and the system will perform a quick test to automati- cally "learn" the maximum flow rate possible for that mold within that pressure limit. This "LearnMold" mode also automati- cally ramps the flow rate down from the maximum to generate a pressure/flow curve for the tool, which is checked—and revised, if necessary—on every subsequent startup of the tool to determine whether flow conditions inside the mold have changed. Using a 5-hp variable-speed pump, Nextherm can match the output of commonly used centrifugal pumps from 0.5 to 10 hp (using no more than 3.2 hp). The gear pump is said to be much more energy efficient than centrifugal pumps; less waste heat from the pump reduces the load on the central chiller or cooling tower, increasing its effective capacity. Tests at one molder have shown cycle-time reductions of 35-50% with this system. Tighter control of actual mold-temperature control (as opposed to water tempera- ture) claimed for this system offers other potential benefits, such as ability to use a lower melt temperature and/or a higher water temperature. Una-Dyn/Aquatech currently offers a 30-gpm Nextherm unit, though future plans include models with 60, 90 and 120 gpm. 703-490-7000 • unadyn.com HEATING/COOLING Advanced TCU Controls Both Temperature & Flow Rate Reduce scrap and improve quality with Per-Fix ® specialty flaw repair coatings. Salvage costly parts with surface imperfections with our permanent flaw repair touch-up coatings. In 60-seconds, Per-Fix instantly repairs the most common visual part defects including knit/flow lines, gloss imperfections, splay and many others. 800-336-9828 • chem-pak.com info@chem-pak.com SPRAY-ON PERFECTION Per-Fix ® Clear Transparent coating to fix light to medium flaws. Free evaluation kit. Per-Fix ® Black For deeper flaw repairs. Free evaluation kit. Per-Fix ® Color Match Custom formulated based on full-color analysis of existing products. Free sample match. 54 NOVEMBER 2018 Plastics Technology PTonline.com Keeping Up W it h Technolog y

Articles in this issue

Links on this page

Archives of this issue

view archives of Plastics Technology - NOV 2018