Plastics Technology

JUN 2013

Plastics Technology - Dedicated to improving Plastics Processing.

Issue link: https://pty.epubxp.com/i/131588

Contents of this Issue

Navigation

Page 49 of 51

processor strategies wisconsin plastics inc. 'Value-added' Molder adds 3D Printing Wisconsin Plastics inc. decided recently to bring water-transfer printing in-house, making it one of the few molders to offer this decorating technology as part of its full-service product offerings. Mike Kilgore, supervisor of prototyping for the Modern Design and Development group, one of the independent companies that comprise Wisconsin Plastics (WPI) in Green Bay, Wis., spearheaded this effort. It cost the molder about $5000 up front, a price tag that included equipment and training from TWN Industries, Inc., Princeton, Fla., an internationally known leader in water-transfer printing technology. Approximately $15,000 more was invested in setting up the infrastructure to accommodate the new service. Also known as water immersion or hydrographic printing, water-transfer printing is a 3D decorating process where elaborate graphics like wood grain, carbon fber, camoufage, granite, and geometrical designs are applied to a product surface. It has been used to decorate items ranging from entire all-terrain vehicles and car dashboards to small items like bike helmets or automotive trim. The process utilizes a water-soluble flm that contains the printed patterns that are applied to the part. Typically, parts are frst colored in-mold. The graphic flm is then trimmed and placed in a tank of heated water for 60 sec, then sprayed with a patented chemical activator. The activator liquefes the graphics and allows them to adhere to the molded part, essentially wrapping around it as it's immersed in the water. The decorated part is then rinsed and painted with a clear topcoat to protect the graphic. WPI already offers pad printing and hot stamping services. But Kilgore notes that these decorating processes cannot provide the type of surface effects possible with the new technology. "One key advantage with the water-transfer printing process is that you can use it on parts with complex geometries, including round and deep-walled shapes," he says. "You can give a part a fnal graphic look that you wouldn't expect to see in off-the-shelf commercial or retail items. Basically, this process is suitable anytime you want to give a product a unique look." In its frst application of the technology, WPI took its valueadded philosophy to another level by actually developing the graphics for the molded items to be decorated. The customer, a 48 june 2013 Plastics technology 1 2 3 4 In the water transfer-printing process, parts are frst molded in a base color (1). A water-soluble graphic flm is then placed in a tank (2), where it is chemically converted to a liquid that 'wraps" itself around the submerged part (3). The part is then rinsed with clear water and is painted with a protective top coat (4). major paper product manufacturer for whom the company molds paper-towel dispensers for washrooms, wanted to offer a line of soap and skin-care dispensers with a unique, upscale look. Kilgore is actively marketing the new service, and while the goal is to acquire more customers with large-volume needs, WPI is also considering acting as a service that other processors could utilize. WPI's frst water-transfer tank is roughly 26 in. wide by 60 in. long by 32 in. deep. Explains Kilgore, "The tank determines the size of part you can decorate, though the depth of the water is not critical. However, we can do parts that are larger than this tankā€”it all depends on how you process the part. We also can get a larger tank in the future as demand grows." He notes that while this is a semi-automated process now, WPI (wpimodern.com) is aiming to make it fully automated in the near future. WPI has already developed the fxture that holds the part in the water, and the aim is to lower the part automatically with the push of a button. An operator would still lower the flm into the water and spray it with the activator. By Lilli Manolis Sherman, Senior Editor

Articles in this issue

Links on this page

Archives of this issue

view archives of Plastics Technology - JUN 2013