Plastics Technology - Dedicated to improving Plastics Processing.
Issue link: http://pty.epubxp.com/i/929876
Also new is orange-colored Ixef 1524 polyarylamide (PARA, also known as MXD6 nylon), a halogen-free flame-retardant grade with 50% glass fiber for electric-vehicle recharge connectors. It is color matched to "signal orange" for this application (photo, p. 28). Despite high glass content, it reportedly shows high flow for walls as thin as 0.5 mm, supporting high injection speeds and short cycles. It offers a balance of high stiffness and toughness, as well as a glossy, resin-rich surface. It also meets UL 94V-0 at 0.4 mm. Another new Ixef PARA grade is black Ixef 3012, containing 55% carbon and glass fibers. It was developed to offer extremely high strength and stiffness at low weight, along with "exceptional" surface finish. Its high flow allows molding long, thin parts that need no painting for automotive, aerospace, and consumer appli- cations. Additional properties include electrical conductivity and high creep resistance. Applications could include auto air-vent lamellas and throttle-body levers, drone components, and action- camera fixation parts and cantilever snaps. Processing Technologies International, LLC | 2655 White Oak Circle Aurora, IL 60502 | Tel: 630.585.5800 | Fax: 630.585.5855 World Class Sheet Extrusion Systems HVTSE ® DRYER-LESS EXTRUSION SYSTEMS SHEET EXTRUSION TECHNOLOGY LEADER G-Series ® Configurable J-Stack roll stands yield superior sheet performance LIW feeders provide quick formulation set-ups and changeovers TITAN ® Plus control automation for ease of system coordination and control 100% flake feeding capability minimizes regrind inventory build-up Resins: PET, PLA, PP, PS, HDPE... Model: HVTSE ® 105mm-52D Rate: 3,500 lb/hr (1,590 kg/hr) Width: 40 in (1m) Gauge: 15 - 40 mils (0.38 - 1.00 mm) Process: Inline thermoforming Twin Screw by Bandera www.psi-polymersystems.com SCREEN CHANGERS • MELT PUMPS • MIXERS • PACKAGED SYSTEMS What more can you get from your process? • Precise dimensional control • Better melt integrity • Stabilized output • I ncreased yield • Higher use of regrind Industry's most reliable Melt Pump From through-hardened gears to high-wear bearings to leak-free, anti-galling seals, PSI melt pumps provide you consistent, trouble- free performance, year after year. Join the ranks of processors turning to PSI and put us to the test. Discover how much more you can get from your process! Call today to ask for a no-risk trial! 1-828-468-2600 Don't forget to ask about our Pump Exchange program! FROM THE EXTRUDER TO THE DIE - PERFORMANCE GUARANTEED! • www.psi-polymersystems.com • sales@psi-polymersystems.com Visit us in Booth W5791 New Technyl Red S is a 666 nylon highly heat stabilized for parts such as charge-air coolers. 30 FEBRUARY 2018 Plastics Technology PTonline.com M AT E R I A L S Close -Up On Technolog y